Agrobulls Machinery

Rear Loader Bucket (XL)

Price:30

Our AtomvXL model is designed for tractors 75 hp and above. Suitable for stripping, loading, etc. Added truck – Ideal for centipede loading. Thanks to its ergonomic and lightweight structure, it will not tire your tractor.

Properties;
Lifting Load Max. 4.65 m.
Discharge Height Max. 3.75 m.
Weight 600-650 kg.
Height 235 cm.
Width 155 cm.
Bucket Width 170 cm.
Bucket Volume 0.65 - 0.75 m³
Number of Hydraulic Hoses 4.
Required Power 75-120 hp
Load Capacity Maximum it can handle 1250 kg.

Attaches that can be installed:
Pop-up Bucket Attachment, Roll Bale Attachment, Skewer Square Bale Attachment, Beetroot and Straw Mouth.

Rear Loader Bucket

Price:30

Our Atom X model is designed for tractors 55 hp and above. Suitable for stripping, loading, etc. Ideal for truck loading. Thanks to its ergonomic and lightweight structure, it will not tire your tractor. 1.5 mt or 1.7 mt bucket options are available.

Properties;
Lifting Load Max. 4.1 m.
Discharge Height Max. 3.2 m.
Weight 425-450 kg.
Height 207 cm.
Width 145 cm.
Bucket Width 150-170-cm.
Bucket Volume 0.55 - 0.65 m³
Number of Hydraulic Hoses 3
Required Power 55-100 hp
Load Capacity Maximum it can handle 1250 kg.

Attachments that can be installed:
Pop-up Bucket Attachment, Roll Bale Attachment, Skewer Square Bale Attachment, Beetroot and Straw Mouth.

Double Cutter Bar Mowers

Price:30

Machine Specifications;
*Mowing Width: 170 cm.
*Number of Leaf Blades: 45 Pcs
- 36 Straight Blades..
- 8 Straight Pin Blades.
- 1 Reverse Blade.
*Total Weight: 200 kg
*Tail Shaft Speed: 540 d.d.
*Tractor Power Requirement: 25 Hp
*Cutting Part Position Adjustment: With Hydraulic Piston.

Description
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
The two blades move in the opposite direction on top of each other, cutting shear.
There are no harpses on the blades in this model.
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)

Promax Zaga Type Double Movement Bar Mowers

Price:30

Machine Specifications;
*Mowing Width: 175 cm.
*Number of Leaf Blades: 24 Pcs
*Number of Hair Harpses 2: 12 Pcs
*Total Weight: 250 kg.
*Tail Shaft Speed: 540 d.d.
*Tractor Power Requirement: 25 Hp
*Cutting Part Position Adjustment: With Hydraulic Piston.

Description
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
Leaf blades make shear cuts by moving in the opposite direction of each other with hair harpssa in the hair harpses. (In this model, hair is ly mobile on harpses.)
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel.
It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (Including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)
MOWERS WITH ZIP AND LEAF BLADES

Single Cutter Hydraulic Bar Mowers

Price:30

Hydraulic Properties;

*Mowing Width: 180 cm.

*Number of Leaf Blades: 24 Pcs

*Number of Harps (2): 12 Pcs

*Total Weight: 185 kg.

*Tail Shaft Speed: 540 d.d.

*Tractor Power Requirement: 25 Hp

*Cutting Part Position Adjustment: With Hydraulic Piston

Description

It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.

The blades cut shear between the harpses with two-way movement. (Harps are still in this model)

The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.

The wings behind the cutting section open the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.

There are two types of hydraulic and mechanical types.

It can be used efficiently in harvesting green feed crops and legumes.

Recommended use is 1-2 normal gears 10 -14 gas. (operator, field status may vary depending on tractor type.)